Abstract
This investigation presents detailed characteristics of an implanted planar InSb p+n diode with a junction area scaled down to 20 × 20 μm2. Low-temperature photo-chemical vapor deposition oxide stacked with an optimized thin anodic film, instead of a gate control structure, is used to control the planar surface potential of the implanted p+n diode under the weak inversion condition on the n-type surface and under weak accumulation on the p-type surface. The zero-bias resistance–area product is 7.6 × 104 Ω cm2 at 77 K. To the best of the authors' knowledge, this result represents the best performance of a small-area and implanted planar diode to date. The dark current is controlled by an internal shunt conduction mechanism, which seems to be related to the defects that are produced by the implantation. Low leakage current and high breakdown voltage have proven the feasibility of the composite anodic oxide/SiOx that is stacked as the passivation structure in small-pixel InSb p+n photodiodes for focal plane array applications. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
