Abstract
A parametric study has been conducted to investigate particle deposition on solid surfaces during free convection flow in an internally heated and cooled square cavity filled with air. The cavity walls are insulated while several pairs of heaters and coolers (HACs) inside the cavity lead to free convection flow. The HACs are assumed to be isothermal heat source and sinks with temperatures Th and Tc (Th>Tc). The problem is numerically investigated using the Eulerian–Lagrangian method. Two-dimensional Navier–Stokes and energy equations are solved using finite volume discretization method. Applying the Lagrangian approach, 5000 particles, distributed randomly in the enclosure, were tracked for 150s. Effects of drag, lift, gravity, buoyancy, pressure gradient, shear stress terms, thermophoresis and Brownian forces on particles movements are considered. Furthermore, effects of various design parameters on the heat transfer rate and deposition of particles such as Rayleigh number (104⩽Ra⩽107) as well as orientation and number of the HACs are investigated. Our simulations indicate that thermophoretic force can significantly affect the distribution of particles of dp=1μm diameter. It is also found that at low Rayleigh numbers the particle distribution is strongly non-uniform. Moreover, it was observed that by increasing number of the HACs and changing orientation of the HACs from vertical to horizontal, deposition rate of the solid particles increases significantly.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.