Estimation of site amplification functions for the National Capital (Delhi) Region, India

Abstract

The site amplification functions at 48 sites of NCR have been estimated in this study using the waveforms of locally recorded 23 earthquakes. Due to the absence of a suitable reference site in the region, the widely used horizontal-to-vertical spectral ratio (HVSR) technique has been used for this purpose. The maps showing the spatial distribution of predominant frequencies and the site amplifications at different frequencies corresponding to the natural frequencies of the different-storey buildings have been presented. The predominant frequencies in general are found to be in the range 2.5–7.5 Hz with an average of 4.4 Hz for the region having older alluvium sediments and in the range 1.1–6.4 Hz with an average of 3.3 Hz for the region with the younger alluvium deposits. The average value of the site amplifications for the frequency band 3.0–10.0 Hz is in the range 2.0–5.3 for the sites with significant soil cover, while the spectral amplification corresponding to the predominant frequency varies from 2.5 to 7.5 at most of the sites. The spectral amplification level lies in the range 2.0–3.0 for the sites with less or no sediment cover. The spectral amplification levels presented for the different-storey buildings may be used for the mitigation of seismic hazard in the region. The estimated site amplification functions may be used in the simulation of the site-specific strong ground motions and therefore useful for the evaluation of seismic hazard of a region.