Abstract
Epoxy resins have low impact strength and poor resistance to crack propagation, which limit their many end use applications. The main objective of this work is to incorporate both acrylonitrile-butadiene-styrene copolymer (ABS) and organically modified clay (Cloisite 30B) into epoxy matrix with the aim of obtaining improved material with the impact strength higher than neat epoxy, epoxy/clay and epoxy/ABS hybrids without compromising the other desired mechanical properties such as tensile strength and modulus. Impact and tensile properties of binary and ternary systems were investigated. Tensile strength, elongation at break and impact strength were increased significantly with incorporation of only 4 phr ABS to epoxy matrix. For epoxy/clay nanocomposite with 2.5% clay content, tensile modulus and strength, and impact strength were improved compared to neat epoxy. With incorporation of 2.5% clay and 4 phr ABS into epoxy matrix, 133% increase was observed for impact strength. Ternary nanocomposite had impact and tensile strengths greater than values of the binary systems. Morphological properties of epoxy/ABS, epoxy/clay and epoxy/ABS/clay ternary nanocomposite were studied using atomic force microscopy (AFM) phase imaging, scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). New morphologies were achieved for epoxy/ABS and epoxy/ABS/clay hybrid materials. Exfoliated clay structure was obtained for epoxy/clay and epoxy/ABS/clay nanocomposite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.