Abstract
ABSTRACT This study evaluates the thermal and mechanical behavior of hybrid composites made from date palm (DP) and kenaf fibers (KF) in an epoxy thermoset matrix. Both DP and KF fibers are abundant and renewable, reducing environmental impact. KF offers high tensile strength and stiffness, improving composite strength and rigidity, while DP fibers offer toughness and impact resistance, enhancing durability. The composites were developed in 30%, 50%, and 70% DP-KF compositions using layup and hot-pressing methods. Fiber treatment through alkalization was analyzed for its impact on mechanical and thermal properties to find the optimal fiber ratio. The hybrid composites were subjected to DMA, TGA, and flexural tests. The treated composites exhibited fewer impurities and increased cellulose content, resulting in enhanced flexural performance. This improvement was evident through higher storage modulus, lower loss modulus, and reduced tan δ when exposed to thermal stress. The 30% DP and 70% KF composites exhibited best performance. The treated 30DP-70KF exhibited improvement in the flexural strength and modulus by 13.8% and 2.7%, respectively. TGA demonstrated that treated 30DP-70KF composites had a higher glass transition temperature (Tg) and better thermal degradation resistance. These findings highlight the potential of natural fiber hybrids in creating sustainable, high-performance composite materials for construction and industrial applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
