Enhanced optimization assisted interference mitigation with vertical beamforming in 3D MIMO-OFDMA for 5G wireless communication network

Abstract

PurposeMultiple input multiple-output (MIMO) has emerged as one among the many noteworthy technologies in recent wireless applications because of its powerful ability to improve bandwidth efficiency and performance, i.e. through developing its unique spatial multiplexing capability and spatial diversity gain. For carrying out an enhanced communication in next-generation networks, the MIMO and orthogonal frequency division multiple systems were combined that facilitate the spatial multiplexing on resource blocks (RBs) based on time-frequency. This paper aims to propose a novel approach for maximizing the throughput of cell-edge users and cell-center users.Design/methodology/approachIn this work, the specified multi-objective function is defined as the single objective function, which is solved by the introduction of a new improved algorithm as well. This optimization problem can be resolved by the fine-tuning of certain parameters such as assigned power for RB, cell-center user, cell-edge user and RB allocation. The fine-tuning of parameters is attained by a new improved Lion algorithm (LA), termed as Lion with new cub generation (LA-NCG) model. Finally, the betterment of the presented approach is validated over the existing models in terms of signal to interference plus noise ratio, throughput and so on.FindingsOn examining the outputs, the adopted LA-NCG model for 4BS was 66.67%, 66.67% and 20% superior to existing joint processing coordinated multiple point-based dual decomposition method (JC-DDM), fractional programming (FP) and LA models. In addition, the throughput of conventional JC-DDM, FP and LA models lie at a range of 10, 45 and 35, respectively, at the 100th iteration. However, the presented LA-NCG scheme accomplishes a higher throughput of 58. Similarly, the throughput of the adopted scheme observed for 8BS was 59.68%, 44.19% and 9.68% superior to existing JC-DDM, FP and LA models. Thus, the enhancement of the adopted LA-NCG model has been validated effectively from the attained outcomes.Originality/valueThis paper adopts the latest optimization algorithm called LA-NCG to establish a novel approach for maximizing the throughput of cell-edge users and cell-center users. This is the first that work uses LA-NCG-based optimization that assists in fine-tuning certain parameters such as assigned power for RB, cell-center user, cell-edge user and RB allocation.