Abstract
A method was developed to enhance metal ion adsorption of soybean hulls for wastewater treatment using copper ion (Cu 2+) as a typical metal ion. Hulls, extracted with 0.1 N NaOH, were modified with different citric acid (CA) concentrations (0.1-1.2 M) at 120°C for 90 min. CA-modified hulls had adsorption capacities for Cu 2+ from 0.68 to 2.44 mmoles/g, which was much higher than for unmodified hulls (0.39 mmoles/g). The total negative charge for these hulls also increased with increasing CA concentration and was about twice the copper ion adsorption capacity at all CA concentrations. The need for NaOH (base) extraction (BE) before CA modification was examined. CA-modified, non-extracted (NE) and CA-modified, BE hulls were compared for adsorption kinetics and adsorption capacity. Base extraction resulted in modified hulls with faster adsorption kinetics and slightly lower adsorption capacity for copper ion than NE hulls. For BE, CA-modified hulls, increasing the temperature from 25°C to 60°C appeared to have no effect on the rate of copper ion removal from solution. CA modification of soybean hulls greatly enhanced metal ion removal and resulted in a product with possible commercial potential for metal ion remediation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
