Abstract
Recycling reclaimed asphalt pavement (RAP) has attracted extensive attention for its environmental sustainability. As a typical industrial solid waste, steel slag with magnetic phase can facilitate the induction healing efficiency of asphalt mixtures. However, few researches focused on the healing characteristics of recycled asphalt mixtures with steel slag. Hence, this issue deserves systematic investigation. In this study, the chemical composition and static magnetic properties of steel slag with different particle size were estimated. And the induction heating performance, healing efficiency, multiple healing characteristic and healing rate after aging of their recycled asphalt mixtures were determined. The results indicate that magnetic hysteresis loops of steel slags reveal the typical narrow S-type curves, representing their magnetically soft characteristic with low coercivity. The highest Fe content and superior static magnetic properties are discovered in ASSF with particle sizes of 9.5–16 mm, and its saturation magnetization and coercivity gain up to 2.13 emu/g and 148.09 Oe. The ascending particle size of steel slag incorporated in recycled asphalt mixtures accelerates its induced temperature increment, effective heating depth and healing efficiency in contrast to the RAP addition. R7 with all component steel slag possesses the highest fracture energy of 685 J/m2 and HRE of 51.6% after healing. Healing rate of recycled asphalt mixtures grows in the previous four cycles and then start to reduce during the fifth cycle. R40 demonstrates the maximum HRS of 57.9% after the fourth cycle with a 10.7% diminution than R0, which maintains a desirable level. Long term aging boosts the attenuation degree of the self-healing performance for RAM with the increase of RAP dosage. HRAS of R40 undergone aging declines by 21.3% and merely reaches 29.1% due to the faster aging rate and inferior diffusion velocity into the cracks of recycled asphalt in recycled asphalt mixtures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.