Abstract
This paper presents a novel frequency compensation technique for a low-dropout (LDO) voltage regulator. Enhanced active feedback frequency compensation is employed to improve the frequency response. The proposed LDO is capable of providing high stability for current loads up to 150 mA with or without loading capacitors. The proposed LDO voltage regulator provides a loop bandwidth of 7.8 MHz under light loads and 6.5 MHz under heavy loads. The maximum undershoot and overshoot are 59 and 90 mV, respectively, for changes in load current within a 200-ns edge time, while the compensation capacitors only require a total value of 7 pF. This enables easy integration of the compensation capacitors within the LDO chip. The proposed LDO regulator was designed using TSMC 0.35-μm CMOS technology. With an active area of 0.14 mm2 (including feedback resistors), the quiescent current is only 40 μA. The input voltage ranges from 1.73 to 5 V for a loading current of 150 mA and an output voltage of 1.5 V. The main advantage of this approach is the stability of the LDO circuit when external load capacitors are connected, or even without load capacitors.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
