Abstract
The production of biodiesel through the transesterification method produces a large amount of wastewater that contains a high level of chemical oxygen demand (COD) and oil and grease (O&G). In this study, coagulation was adopted to treat the biodiesel wastewater. Two types of coagulation were examined using a standard jar test apparatus, i.e. polyaluminium chloride (PAC) and aluminium sulphate. The effects of pH and coagulant dosage were examined at 150 rpm of rapid mixing and 20 rpm slow mixing and 30 min settling time. Higher removal of suspended solids (SS), colour, oil and grease (over 90%), and COD (over 80%) were achieved at pH 6. PAC was found to be superior to aluminium sulphate, yielding a lower amount of coagulation, i.e., 300 mg/L. The result indicated that the coagulation and flocculation process played bigger roles in the integrated treatment system.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
