Energy efficiency evaluation of grid connection scenarios for stationary battery energy storage systems

Abstract

The connection to the electrical grid is a key component of stationary battery energy storage systems. Utility-scale systems comprise of several power electronics units. Various grid connection topologies may be used, depending on the conversion stages within each unit, the load distribution between the power electronics and additionally the grid level to which the system is connected. The energy efficiency, which is a key performance indicator for storage systems, is compared between various scenarios. Detailed models are developed for the key components: The inverter/rectifier, the DC-DC converter, and the transformer. The respective model parameterization is based on state-of-art industry components and compared against experimental data. Two grid application scenarios, namely Primary Control Reserve and Secondary Control Reserve, are simulated for a comparison in reference application scenarios often discussed for utility-scale battery energy storage systems. Results show that grid connection setups without an intermediate DC link conversion stage are more efficient than those with. The optimum number of inverters in dependence on the actual load is determined. The connection to the low-voltage grid is more efficient due to the absence of the transformer which introduces significant additional losses. The topology models developed herein can be integrated into system models that include the overall systems or used for the design of novel battery systems grid connection topologies with detailed evaluation down to the component level.