Abstract
A rotary energy recovery device (RERD) is widely used in a reverse osmosis desalination system. In order to maintain the device running in an available torque and obtaining a long service life, a portion of high pressure seawater is usually sacrificed to work as lubrication to reduce the friction torque of the device. However, when using such method, a certain amount of energy recovery efficiency will be lost due to the lubrication or leakage. This paper focuses on improving operating performance of a rotary energy recovery device by making textured grooves on the surfaces of two end covers of the RERD. The experimental results show that compared to the un-textured RERD, the textured RERD reduces the device's torque by half, and successfully improved the efficiency by 40% under the mating clearance of 0.035mm, operating pressure of 6.0MPa and rotary speed of 500rpm. In addition, thanks to the groove textured surface which dramatically reduces the RERD's torque and permits the mating clearance to be minimized. Under the small clearance of 0.025mm, the energy recovery efficiency of the textured RERD can be increased up to 96.3% at an operating pressure of 6.0MPa which can well satisfy the requirement of the industry application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
