Empirical Correlations for Sizing Adiabatic Capillary Tube Using LPG as Refrigerant in Split-Type Air-Conditioner

Abstract

This paper presents correlations for sizing adiabatic capillary tubes which serves as an expansion device in split-type air-conditioner with LPG, novel hydrocarbon (HC) mixtures of butane (HC600) and propane (HC290) as refrigerant. A homogenous two-phase flow model developed by the authors and also experimental investigation of the Liquified Petroluem Gas (LPG) refrigerant flow in adiabatic capillary tubes were used in this study. The theoretical model was used to assess various percentage compositions of these HC mixtures and validated with the experimental data. For each HC refrigerant mixture, correlations for sizing adiabatic capillary tube which contains the relevant factors, viz. capillary tube inner diameter, inlet pressure, refrigerant mass flow rate, capillary tube surface roughness and capillary tube inlet subcooling was developed. The proposed correlations were compared with the authors measured data and found to be in good agreement. Further validation was made by comparing the mass flow rates predictions of the correlations with experimental data of previous studies and found that these correlations are consistent. The correlations can be used in small vapour compression refrigeration systems working with the HC refrigerant mixtures for practical design and optimization.