Emission of PAHs, PCBs, PBDEs and heavy metals in air, water and soil around a waste plastic recycling factory in an industrial park, Eastern China

Abstract

Environmental information in recovery of waste plastic in a certificated factory in industrial park in Eastern China is provided in this paper. The process involves raw material storage, washing, closed crushing, closed regeneration, product storage, and waste storage. Particulate matters, heavy metals, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyis (PCBs), and polybrominated diphenyl ethers (PBDEs) emitted from the production process are analyzed. A total of 25 atmospheric samples, 6 soil samples, and 2 water samples are sampled in and around the factory. The following conclusions could be concluded: (1) the concentrations of Cu and Pb are significantly higher than that of Ni, Cr and Cd in total suspended particulate matters; (2) PHE, DghiP, NAP and FLA are the main PAHs components in the air; PHE, FLA, DghiP, NAP, and PYR are the main congeners of PAHs in both washing wastewater and surface water; PHE, NAP, FLA, and CHR are the major congeners in the soil samples; (3) PCB-18, PCB-17 and PCB-31,28 are the main congeners in the air samples; PCB-70 and PCB-110 are the main congeners in soil samples; PCB-49 and PCB-52 are the main congeners in both surface water and washing wastewater; (4) DBDPE and BDE-209 are the main congeners for the all air, water and soil samples. Washing process and crushing process are identified as the main sources of all the above pollutants releases, and management strategies are provided to reduce the pollutants emission and the environmental hazardous caused by the waste plastic recovery process.