Abstract
In this study Ce3+-Cu2+ doped barium hexaferrite Ba0.5Ce0.5CuFe11O19 composite sample was synthesized by a conventional method and barium hexaferrites/CeO2 phase composition, X-Ray Diffractometer were examined. Sample morphology was observed by SEM. A VSM was used to analyze the magnetic properties of the ferrites. Complex permittivity, permeability, reflection loss, absorption loss and shielding effectiveness were analyzed by using a VNA measuring the transmission/reflection coaxial airline method. The phase changes of the crystal structure because of the effect of Ce3+ ions into Ba2+ site and Cu2+ ions into Fe3+ areas were investigated. The resulting composition in these two resonance phases has a maximum absorption loss value at ∼6.48 GHz and ∼11.25 GHz and a maximum reflection loss value at the same frequencies. In this synthesized composition structure, it has been observed that it has a maximum reflection loss value of approximately –22.2dB and the highest shielding effectiveness value of 33.3 dB at microwave frequency 11.25 GHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.