Electrochemical Removal of Metal-Organic Complexes in Metal Plating Wastewater: A Comparative Study of Cu-EDTA and Ni-EDTA Removal Mechanisms.

Abstract

Cu and Ni complexes with ethylenediaminetetraacetic acid (Cu/Ni-EDTA), which are commonly present in metal plating industry wastewaters, pose a serious threat to both the environment and human health due to their high toxicity and low biodegradability. In this study, the treatment of solutions containing either or both Cu-EDTA and Ni-EDTA using an electrochemical process is investigated under both oxidizing and reducing electrolysis conditions. Our results indicate that Cu-EDTA is decomplexed as a result of the cathodic reduction of Cu(II) with subsequent electrodeposition of Cu(0) at the cathode when the cathode potential is more negative than the reduction potential of Cu-EDTA to Cu(0). In contrast, the very negative reduction potential of Ni-EDTA to Ni(0) renders the direct reduction of EDTA-complexed Ni(II) at the cathode unimportant. The removal of Ni during the electrolysis process mainly occurs via anodic oxidation of EDTA in Ni-EDTA, with the resulting formation of low-molecular-weight organic acids and the release of Ni2+, which is subsequently deposited as Ni0 on the cathode. A kinetic model incorporating the key reactions occurring in the electrolysis process has been developed, which satisfactorily describes EDTA, Cu, Ni, and TOC removal. Overall, this study improves our understanding of the mechanism of removal of heavy metals from solution during the electrochemical advanced oxidation of metal plating wastewaters.