Abstract
Electro-oxidation using a boron-doped diamond (BDD) anode can be used as an alternative to leachate treatment. Aside from the hydroxyl radical, BDDs are capable of generating chloride and sulfate radical species that play significant roles in the oxidation of pollutants. This research investigated the role of Cl-:SO4 2- ions at molar ratios of 237:1, 4:1 and 18:1, and the influence of applied current density (i.e. 50, 75 and 100 mA cm-2) on the removal of organic and ammonium contaminants. The results show that current density had considerable effects on chemical oxygen demand (COD) and colour removal, while ion composition of Cl-:SO4 2- at pH 3, 5 and 8.5 (original pH) gave different effects on COD and ammonium removal. The pH had a significant effect on the COD removal at the ratio of 237:1, but showed no dramatic effect at the ratio of 18:1, giving ∼40% of COD removal at all pHs tested. This indicates that electro-oxidation at the ratio of 18:1 could be effectively conducted at a wide range of pH. Furthermore, the optimum ammonium removal was obtained at pH 8.5 with the ratio of 237:1. This process was found to be ineffective in increasing the biodegradability index of the leachate; instead, it exhibited mineralization of organic content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
