Abstract
The electrical properties of poly( p-phenylene vinylene) (PPV) Langmuir-Blodgett (LB) films were investigated, wherein transparent indium-tin oxide (ITO) and aluminum (Al) were used as the electrodes. Their I–V characteristics depended strongly on the thickness of PPV LB film, and the electric conductivity of the PPV LB film was in the range of 10 −2–10 −15 (S/cm). Their C–V characteristics showed that the capacitance was reversibly proportional to the thickness of PPV LB film and was kept constant when the applied voltage changed from −1.0 V to +1.0 V. These results indicated that PPV LB film was an insulator in this range of applied voltage without doping. Under forward bias, yellow-green light emission was observed in PPV LB film based light emitting diodes (LEDs), the highest light emission reached more than 100 cd/m 2 in the case that PPV LB film was deposited for 80 layers, i.e. a ITO/PPV(80L)/Al device.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
