Abstract
The initial results of a post-irradiation examination study conducted on a SiC-SiC tubular specimen irradiated under a high radial heat flux are presented herein. The elastic properties of the specimen were evaluated before and after the irradiation using the resonant ultrasound spectroscopy (RUS) technique. The composite tubular specimen was considered as an orthotropic elastic with nine elastic constants (Young's moduli, shear moduli and Poisson's ratios—three components of each) for representing its full elastic deformation behavior. All the elastic moduli decreased after irradiation; the reduction was as high as 35% in one of the moduli. The significant decrease in the moduli indicates the presence of microcracks. The results from a computational study show significant stress development in the specimen due to irradiation, primarily caused by differential swelling across the thickness of the specimen. The evaluated stresses exceed the proportional limit stress of the material, indicating the likelihood of matrix microcracking, and thus corroborating the results obtained from RUS. X-ray Computed Tomography (XCT) study confirmed the presence of cracks in the irradiated specimen. These cracks occurred at the inner region of the specimen and propagated in axial and hoop directions. These XCT results are in agreement with the RUS results and stress distribution results from the computational study.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
