Efficacy of Various Sanitizers against Salmonella during Simulated Commercial Packing of Tomatoes

Abstract

Chemical sanitizers are usually added to dump tank water to minimize cross-contamination during tomato packing. However, the efficacy of sanitizers continues to be questioned. This study assessed the ability of six commonly used sanitizers (40 ppm of peroxyacetic acid, 40 ppm of mixed peracid, 40 ppm of available chlorine alone or acidified to pH 6.0 with citric acid or T-128, and electrolyzed water containing 40 ppm of available chlorine at pH 6.7) to reduce Salmonella on tomatoes, in wash water, and on equipment surfaces using a pilot-scale processing line. Red round tomatoes (11.3 kg) were dip inoculated to contain Salmonella at ∼6 log CFU/g, air dried for 2 h, treated for 2 min in a 3.3-m-long dump tank and then dried on a roller conveyor, with sanitizer-free water serving as the control. Tomato and water samples were collected at 15-s intervals during washing with additional dump tank, water tank, and roller conveyor surface samples collected after washing. All samples were appropriately neutralized, diluted, and surface plated on Trypticase soy agar containing 0.6% yeast extract, 0.05% ferric ammonium citrate, and 0.03% sodium thiosulfate with or without membrane filtration to enumerate Salmonella. All six sanitizer treatments were more efficacious than the water control (P ≤ 0.05), with chlorine plus citric acid yielding the greatest Salmonella reduction on tomatoes (3.1 log CFU/g). After processing, all sanitizer wash solutions contained significantly lower (P ≤ 0.05) levels of Salmonella than the water control (3.0 log CFU/ml). The four chlorine-based sanitizer treatments yielded significantly lower Salmonella populations (P ≤ 0.05) in the wash solution compared with peroxyacetic acid and mixed peracid. After processing with sanitizers, Salmonella populations decreased to nondetectable levels (<0.2 log CFU/100 cm(2) ) on the equipment surfaces.