Effects of Water and Fertilizer Flow Rates on the Mixing Process and Fertilization Uniformity of Cotton under Mulch Drip Irrigation

Abstract

Water and fertilizer flow rates are the most convenient variable to control in the process of drip irrigation under mulch. Suitable water and fertilizer flow rates are beneficial to improve water and fertilizer uniformity. Nine groups of water and fertilizer rate combinations were set in the common water and fertilizer rate range to study the influence of the water and fertilizer rate on fertilization uniformity. The numerical simulation of the mixing process in the main pipe was first carried out based on the multiphase flow theory, and then the field experiment for the different water and fertilizer rate combinations in the machine-picked cotton-planting pattern (one film, three tubes and six rows) was conducted. Through the numerical simulation of the mixing process in the pipeline and the analysis of water and fertilizer uniformity field experiment results, it was found that the uniform mixing length is related to the water and fertilizer flow rate, and the water and fertilizer flow rate had some effect on fertilizer uniformity. In the irrigation system with a main pipe diameter of 100 mm and a fertilizer injection pipe diameter of 20 mm, the water fertilizer flow rate ratio should be between 3–8 to ensure the effect of the mixing process and fertilization uniformity. A water flow rate of 2 m s−1 and fertilizer flow rate of 0.35 m s−1 is recommended during the fertilizer process in northern Xinjiang. This paper shows the feasibility of numerical simulation in the study of cotton water and fertilizer mixing processes, and the results can provide some reference for cotton planting.