Abstract
In this paper, mixtures of Si3N4 powder with different added amounts of single rare-earth oxide Re2O3 (Re = Ce, Nd, Sm, Eu, Gd, Dy, Er, Yb) were heat treated at 1600–1800 °C and the effects of Re2O3 on the transformation and the microstructure of Si3N4 were investigated. Compared with the original Si3N4 powder, the transformation ratio of the Si3N4 powders obviously increased and the phase transformation finishing temperatures decreased by about 100 °C when different rare-earth oxides were added. When the heat-treatment temperature was 1700 °C, the transformation ratio of the Si3N4 powder was about 100%. When the heat-treatment temperature was 1600 °C and the amount of Re2O3 addition was 3 mol%, an anomalous transformation ratio occurred. In addition, it was found that the transformation ratio of Si3N4 changed periodically with the increase of the atomic number of the lanthanide when the heat-treatment temperature was 1650 °C or less. The SEM image of the Si3N4 powders obtained at 1700 °C indicated that the heavy lanthanide oxides such as Er2O3 and Yb2O3 were very helpful to develop rod-like β-Si3N4 particles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
