Abstract
Structural properties of highly c-axis oriented polycrystalline Ga-doped ZnO (GZO) films prepared by ion-plating with a DC arc discharge were studied in terms of the oxygen gas flow rate (FO2) introduced into the chamber during the deposition process and the Ga2O3 content in the GZO sintered pellet. The X-ray diffraction (XRD) measurements revealed that the GZO films have the residual compressive stress along the a-axis direction (in-plane) and the tensile stress along the c-axis direction (out-of-plane). The increase in FO2 or the increase in Ga2O3 content was effective for relaxing the in-plane compressive stress induced by the so-called atomic peening effect. The positive correlation between the carrier concentration (n) and the primitive cell volume (V) would be due to the incorporation of Ga atoms substituting Zn sites (GaZns) together with the generation of n-type intrinsic defects or complex defects.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.