Abstract
This study investigates fracture behavior of basalt fiber reinforced concrete (BFRC) and glass fiber reinforced concrete (GFRC) comparatively. For this purpose, three-point bending tests were carried out on notched beams produced using BFRC and GFRC with 0.5, 1, 2 and 3kg/m3 fiber contents to determine the value of fracture energy. Fracture energies of the notched beam specimens were calculated by analyzing load versus crack mouth opining displacement (CMOD) curves by the help of RILEM proposal. In addition, microstructural analysis of the three components; cement paste, aggregate, basalt and glass fiber were performed based on the Scanning Electron Microscopy and Energy-Dispersive X-ray Spectroscopy examinations and analysis were discussed. The results showed that the effects of the fiber contents on fracture energy were very significant. The splitting tensile and flexural strength of BFRC and GFRC were improved with increasing fiber content whereas a slight drop in flexural strength was observed for high volume of fiber content. On the other hand, effect of fiber addition on the compressive strength and modulus of elasticity of the mixtures was insignificant.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
