Abstract
Present study outlines the effect of ZrB2 particles variation on the morphology and mechanical properties of (ZrB2+Al3Zr)/AA5052Al alloy composites. Composites with varying amount of ZrB2 particles have been produced by direct melt reaction (DMR) technique. These composites have been characterized by X-ray diffractometer (XRD) and energy-dispersive spectroscopy (EDS) to confirm the presence of ZrB2 and Al3Zr particles. Optical microscopy (OM) and scanning-electron microscopy (SEM) have been used to understand the morphology. To see the effect of ZrB2 variation on mechanical properties, hardness and tensile properties have been evaluated. The XRD and EDS results confirm the successful formation of ZrB2 particles in matrix of AA5052Al alloy. SEM and TEM studies exhibit that ZrB2 particles are mostly in hexagonal and some rectangular shape while Al3Zr particles are in polyhedron and rectangular shapes. Most of ZrB2 particles are within a size range of 10–190 nm. Interface region is free of any impurity. OM studies show grain refinement of AA5052Al alloy matrix with formation of second phase ZrB2 particles. Tensile results indicate that the UTS and YS improve up to 3 vol.% of ZrB2 but beyond this composition a decreasing trend is observed. The strength coefficient increases with increase in ZrB2 particles up to 3 vol.% in the Al3Zr/Al alloy composites, whereas strain hardening decreases. While beyond 3 vol.% ZrB2 particles in the Al3Zr/Al alloy composite, opposite trend is observed in strength coefficient and strain hardening. Percentage elongation also improves with 1vol.% ZrB2, but further addition of ZrB2 shows an adverse effect. However, a continuous increasing trend has been observed in bulk hardness. Fracture studies show facets of Al3Zr particles and dimples of matrix, but with inclusion of ZrB2 dimple size decreases. Increase in ZrB2 leads to quasi cleavage fracture and debonding of ZrB2 clusters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
