Abstract
Porous UHMWPE with different characteristics are prepared by hot press molding in Metallographic Sample Mounting. Friction and wear loss of porous UHMWPE samples are studied under different loads and lubricant on an improved tribological tester. The friction coefficient and wear loss of samples with porosity of 5.44% are lower than that of samples with porosity of 10.17%. Thickness of porous layer has little effect on the tribological properties of porous UHMWPE. Contact angle remarkable decreases with increasing porosity of UHMWPE samples. The change of wettability is the primary cause of the improving tribological properties of porous UHMWPE.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.