Abstract
Studies were carried out in the treatment of tannery wastewater using upflow anaerobic contact filter (reactor) and on the role of toxic substances viz tannin, sulphide, chromium (3+) in inhibiting the performance of the reactor. The influent COD concentration was varied in the range of 1500 to 16500 mg/l, at different hydraulic retention times viz 36,48,60 hr. The limiting concentrations of toxicity for the three substances viz tannin, sulphide, chromium (3+) were identified in terms of the performance of the reactor viz COD removal percent, biogas production etc. Toxic limits of the above mentioned substances were further estimated in batch process (in vials) to supplement the evidence. In anaerobic contact filter tannin beyond 914 mg/l inhibited the performance, whereas sulphide concentration even upto 180 mg/l and chromium (3+) concentration even upto 140 mg/l did not affect the reactor performance. In batch process tannin above 77 wt.% affected the anaerobic microbial growth. Hydrolysable tannin was present in these tannery wastewaters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.