Abstract
The purpose of this study was to compare the peel, tensile, and shear bond strength values of a commonly used heat-cured denture soft-lining material (Molloplast-B) bonded to a polymethyl methacrylate denture base material. A further purpose was to evaluate the effect of liner thickness and deformation rate on the bond strength. Results showed that recorded failure and the mode of specimen failure are affected by the type of the test method. The highest tensile and shear strengths were obtained by specimens having the lowest liner thickness. The deformation rate had a significant effect on Molloplast-B tensile and shear strengths. Bond strength results must be interpreted with caution. Cohesive failure of soft lining material during testing provides information regarding the material itself instead of an accurate measure of bond strength.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
