Abstract
Abstract This study used a hand layup process to create tri-layer hybrid composites composed of snake grass fiber (SGF) and jute fiber (JF). Two types of hybrid composites were investigated: jute/snake grass/jute (J/S/J) and snake grass/jute/snake grass (S/J/S). The fabricated composites were subjected to mechanical characterization and water absorption studies to verify their compatibility for various applications. The outcome revealed that the J/S/J hybrid sample shows the highest tensile and flexural strength at 68.46 and 78.62 MPa, respectively. This is due to stacking the maximum-strength JF as an exterior layer in the hybrid J/S/J sample. Meanwhile, the S/J/S composite shows a very high impact strength value of 4.45 kJ/mm2 due to the placement of SGF at the outermost layer. It leads to absorbing more impact energy at sudden load applications. Water absorption studies revealed that the S/J/S composite absorbed more moisture than the J/S/J composite. Furthermore, the S/J/S composite exhibited greater biodegradability than the J/S/J composite based on soil burial experiments. From this study, it can be concluded that the J/S/J composite is suitable for structural applications because it has higher tensile and flexural qualities. In contrast, the S/J/S composite can be employed under damping conditions because it has better impact strength.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
