Abstract
AbstractEffect of different solvents on the clay dispersion and the final properties of the thermoplastic polyurethanes (TPUs)/clay nanocomposites prepared via solution mixing was studied. The polyether‐ and polyester‐based TPUs were used along with organically modified clays (C30B, C25A, and C15A) and the pristine montmorillonite (PM). Dimethylacetamide (DMAc) and tetrahydrofuran (THF) were used as solvents for solution mixing. Nanocomposites containing C30B prepared from DMAc solution showed the better clay dispersion than the ones from THF solution, while THF gave the better dispersion of clays for nanocomposites containing C15A. Morphologies of the nanocomposites were observed to be determined not only by the state of clay dispersion in different solvents but also by the interaction between the polymer and the specific clay. Affinity between solvents and clays becomes important when there is no specific interaction between the clay and the polymer of interest, or when the interaction between the two is rather weak. The compatibility between clays and polymers becomes dominating if there exists a specific interaction between the two. FTIR analysis was conducted to study the interactions involved in the nanocomposites. Dynamic mechanical properties measurement was also carried out to see the effect of solvents. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
