Abstract
The dynamic fracture response of a long beam of brittle material subjected to tensile loading is studied. If the magnitude of the applied tensile loading is increased to a critical value, a crack will propagate from one of the longitudinal surfaces of the beam. As an extension of previous work, the effect of shear and of rotary inertia on the tensile loading and the induced bending moment at the fracturing section is included in the analysis. Thus an improved formulation is presented by means of which the crack length, crack tip velocity, bending moment and axial force at the fracture section are determined as functions of time after crack initiation. It is found that the rotary effect diminishes the bending moment effect and retards total fracture time whereas the shear has an opposite effect. Thus by combining the two effects (to simulate to first order the Timoshenko beam) overall fracture is retarded. The results also apply for plane strain fracture of a plate in tensile loading provided the value of the elastic modulus is appropriately modified.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
