Effect of Powder Spreading Parameters on Laser Absorption Behavior and Processability of High‐Strength Aluminum Alloy Fabricated by Laser Powder Bed Fusion

Abstract

Laser powder bed fusion (LPBF) of rare‐earth‐modified high‐strength aluminum alloys presents a novel approach for manufacturing complex components with enhanced structural performance, particularly in aerospace applications. This study fabricates Al–Mg–Sc–Zr specimens using various powder spreading parameters to explore their impact on laser processability. The investigation reveals that varying the powder layer thickness from 30 to 70 μm yields the smallest irradiation diameter of 135 μm at an optimal thickness of 50 μm, attributable to effective multiple reflections, high laser absorption rates, and stability. With an optimal laser power of 400 W, a scanning speed of 600 mm s−1, and a hatching spacing of 60 μm, the sample produced at 50 μm layer thickness achieves a relative density of 99.23%, a top surface roughness of 15.42 μm, and a refined grain size of 1.67 μm. Following aging at 325 °C for 4 h, this sample exhibits a tensile strength of 518 MPa and an elongation of 15.6%. The findings establish a theoretical basis for controlling the morphology and properties of high‐strength aluminum alloys in laser additive manufacturing.