Abstract
More than half of mechanical breakdowns stem from fatigue failure, often occurring suddenly and without warning. Friction stir processing (FSP) enhances the material's toughness and resilience to fatigue by refining its grain structure. This study investigates how multi-pass overlapping technique impacts the fatigue crack growth rate of FSPed Al-Cu alloy. Microstructural analysis revealed that the stir region exhibited uniformly dispersed and fragmented precipitates and finely recrystallized ultrafine grains. The hardness and strength were reduced, and ductility was enhanced after FSP due to high thermal cycling. Fatigue testing demonstrated a significant increase in fatigue life and reduced fatigue crack growth rate attributable to the combined effects of precipitation and grain refinement during cooling-assisted FSP. SEM examination of fatigue fracture surfaces revealed dimples indicative of ductile failure in the rapid crack propagation zone, while the steady-state propagation region displayed striation markings and secondary fractures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Similar Papers
More From: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.