Abstract

The production of hydrogen from ethanol steam reforming with Cu–Ni catalysts supported on MgO- and CaO-modified silica has been studied. Two promoting effects have been found: reduction of the metallic Cu–Ni particles size and strengthening of the metal–support interaction. Moreover, Mg- and Ca-promoted catalysts favour the formation of defective carbon, which is more reactive and thermodynamically easier to be removed during the ethanol steam reforming process. Consequently, higher hydrogen production and lower coke formation are achieved when Cu–Ni catalysts are supported on Mg- or Ca-modified silica in comparison to unmodified Cu–Ni/SiO 2 catalyst. The highest hydrogen selectivity (84.8 mol%) is reached with a Cu–Ni/Mg–SiO 2 catalyst containing 10 wt% Mg, while the incorporation of 10 wt% Ca into Cu–Ni/SiO 2 catalyst reduces considerably the amount of coke deposited from 58.4 to 26.3 wt%, after 3 h of time on stream.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.