Abstract
Moisture induced damage can cause a progressive deterioration in the performance of asphalt pavement by the loss of adhesion between asphalt binder and aggregate surface and/or loss of cohesion within the binder in the presence of water. The objective of this paper is to improve the asphalt mixtures resistance to moisture by using hydrated lime as an anti-stripping additive. For this purpose, two types of asphalt binder were utilized; asphalt grades (40-50) and (60-70) with one type of aggregate of 19.0 mm aggregate nominal maximum size, and limestone dust as a mineral filler. Marshall method was adopted to find the optimum asphalt content. Essentially, two parameters were determined to evaluate the moisture susceptibility, namely: The Index of Retained Strength and the Tensile Strength Ratio. The hydrated lime was added by 1.0, 1.5, and 2.0 percentages (by weight of aggregate) using the saturated surface dry method. It was concluded that using hydrated lime will improve the moisture damage resistance. This was adopted as the value of tensile strength ratio increased by 24.50 % and 29.16% for AC (40-50) and AC (60-70) respectively, furthermore, the index of retained strength also increased by 14.28 % and 17.50 % for both asphalt grades. The optimum hydrated lime content founded to be 1.5 %.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.