Effect of hybrid ratio on shape memory properties of graphene oxide‐carbon/glass fiber composites prepared based on vacuum infiltration hot‐press forming experimental system

Abstract

AbstractShape memory composites now have a wide range of applications in aerospace, medical devices, and smart structures. Seven graphene‐carbon oxide/glass fiber (GO‐CF/GF) hybrid reinforced shape memory composites were prepared using vacuum infiltration hot pressing system (VIHPS) and the shape memory properties of the materials were investigated in 100°C test. By comparing and analyzing the microstructure and shape memory properties of composites containing different volume fractions of GFs, the mechanism of the influence of different hybrid contents of GFs on the organizational properties and shape memory properties was investigated. The results show that when the reinforcement of the composites were all carbon fibers, the composites had the largest elasticity modulus, harder material and the fixation rate of 77.15%, the recovery rate of 95.17%, the porosity of 0.80% and the shape recovery force of 7.98 N. When the reinforcement of the composites were glass fibers, the composites had the smallest elasticity modulus, softer material and the fixation rate of 94.89%, the recovery rate of 77.21%, the porosity of 13.56% and the recovery force of 2.28 N. The results of this test can lay a foundation for subsequent research on fibers with different mixing ratios.Highlights The GO‐CF/GF/EP prepared by VIHPS has excellent shape memory properties. Fiber hybrid ratio affects the composite's porosity and its properties. Fiber hybrid ratio affects the composite's shape fixation, recovery, and memory force. The shape fixation of G6 decreases the lowest with test cycles. Carbon fiber content changes the zero‐stress plane of GO‐CF/GF/EP.