Abstract
AbstractA hierarchical porous cenosphere/geopolymer composite foam (FHCs/KGP) was fabricated by the simultaneous incorporation of O2 pore from hydrogen peroxide and cenosphere filler addition. Effects of both H2O2 content and high‐temperature treatment on the microstructure, porosity and strength of porous FHCs/KGP foams were investigated systematically. The obtained FHCs/KGP foams showed typical amorphous structure and desirable porosity from 65 to 82%. The composites could crystallize in situ to FHCs/leucite foams above 1000℃. Compression strength of the FHCs/leucite foams showed a maximum value of 5 ± 0.3 MPa when treated at 1000°C. The improvement of mechanical properties for the composite foams was attributed to crack deflection, fractured microspheres and the good bond between the FHCs and matrix. This study could open opportunities to employ cellular foams as alternatives in structure and filtration applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Applied Ceramic Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
