Abstract
This study was carried out to investigate the effect of heating rate on dissolution and solidification behavior during transient liquid phase diffusion bonding of Ni-based superalloy GTD-111. The heating rate was varied by 0.1K/sec, 1K/sec, 10K/sec to the bonding temperatures 1373K and 1423K in vacuum. When the heating rate was slower and the bonding temperature was higher, the completion time of dissolution after reaching bonding temperature decreased. When the heating rate was very slow, the solidification proceeded before reaching bonding temperature and the time required for the completion of isothermal solidification was shorter. However, when the total time required for completion of solidification from the beginning of heating was considered, heating at 0.1K/sec was nearly the same as heating at 10K/sec.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
