Abstract
Cellulose nanocrystals (CNCs) were extracted from bleached cotton by sulfuric acid hydrolysis. Thin films were prepared from the aqueous suspension of CNCs by casting and evaporation with 15% glycerol as a plasticizer. Our research aimed to create stable films resistant to water. The structure and the interactions of the films were modified by short (10 min) heating at different temperatures (100, 140, and 160 °C) and by adding different amounts of citric acid (0, 10, 20, and 30%). Various analytical methods were used to determine the structure, surface properties, and mechanical properties. The interaction of composite films with water and water vapor was also investigated. Heat treatment did not significantly affect the film properties. Citric acid, without heat treatment, acted as a plasticizer. It promoted the disintegration of films in water, increased water vapor sorption, and reduced tensile strength, resulting in flexible and easy-to-handle films. The combination of heat treatment and citric acid resulted in stable liquid-water-resistant films with excellent mechanical properties. A minimum heating temperature of 120 °C and a citric acid concentration of 20% were required to obtain a stable CNC film structure resistant to liquid water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.