Abstract
AbstractThis work addresses the preparation of cotton/viscose fabric reinforced hybrid composite with graphene as a filler material by a compression moulding process and investigation on their mechanical properties such as tensile strength, flexural strength, impact strength, and hardness. The graphene filler was taken in different proportions such as 1.5 weight percentage (wt. %), 3 wt. %, and 4.5 wt. %, which was mixed with the matrix material. It was observed that the addition of filler improved the mechanical properties of the composite. The hybrid composite with 4.5 wt. % of graphene was observed with an enhanced tensile strength of 73.9 MPa and flexural strength of 406.2 MPa. An improvement of 21.7 % in tensile strength and 284.2 % in flexural strength was noticed for the addition of 4.5 wt. % of graphene filler. The addition of filler during the preparation of hybrid composite improved the bonding of the epoxy matrix with the cotton/viscose fabric and thereby mechanical properties were enhanced due to better load carrying capacity of the composites.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
