Abstract
To clarify the effect of electric load characteristics on the arc erosion behavior of Ag-Ni electrical contact material, the Ag-8 wt.%Ni material was prepared by powder metallurgy and spark plasma sintering techniques. The arc-erosion tests were performed at inductive and resistive load, respectively. Based on the analysis of the arc parameters, mass change, and eroded morphology, the arc erosion mechanisms were discussed as well. The results show that the bounce height significantly influence the arc parameters. Furthermore, the gradual deterioration of eroded surface can also cause the change in bounce height with operation times, which further results in the variation in arc parameters. Additionally, the resistive load causes far below mass loss than the inductive load, meanwhile, the lower arc power presents at the resistive load. This can be attributed to the current/voltage shock triggered by the inductor and the high current level maintained also by the inductor due to the frequent connection and interruption of current.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
