Effect of Deposition Parameters on the Morphology and Electrochemical Behavior of Lead Dioxide

Abstract

Lead dioxide thin films were electrodeposited on nickel substrate from acidic lead nitrate solution. Current efficiency and thickness measurements, cyclic voltammetry, AFM, SEM, and X-ray diffraction experiments were conducted on PbO2 surface to elucidate the effect of lead nitrate concentration, current density, temperature on the morphology, chemical behavior, and crystal structure. Experimental results showed that deposition efficiency was affected by the current density and solution concentration. The film thickness was independent of current density when deposition from high Pb(NO3)2 concentration, while it decreased for low concentration and high current density deposition. On the other hand, deposition temperature had negative effect on current efficiency more for lower current density deposition. Cyclic voltammetric study revealed that comparatively more β-PbO2 produced compact deposits when deposition was carried out from high Pb(NO3)2 concentration. Such compact films gave lower charge discharge current density during cycling. SEM and AFM studies showed that deposition of regular-size sharp-edge grains occurred for all deposition conditions. The grain size for high temperature and low concentration Pb(NO3)2 deposition was bigger than from low temperature and high concentration deposition conditions. While cycling converted all grains into loosely adhered flappy deposit with numerous pores. X-ray diffraction measurement indicates that high concentration, high temperature, and high current density favored β-PbO2 deposition while α-PbO2 converted to β-PbO2 together with some unconverted PbSO4 during cycling in H2SO4. Keywords: Lead dioxide, Electrodeposition, Current efficiency, Charge-discharge density, Charge efficiency