Abstract
Chip morphology and its formation mechanisms, cutting force, cutting power, specific cutting energy, tool wear, and tool wear mechanisms at different cutting speeds of 100–3000 m/min during dry face milling of Ti-6Al-4V alloy using physical vapor deposition-(Ti,Al)N-TiN-coated cemented carbide tools were investigated. The cutting speed was linked to the chip formation process and tool failure mechanisms of the coated cemented cutting tools. Results revealed that the machined chips exhibited clear saw-tooth profile and were almost segmented at high cutting speeds, and apparent degree of saw-tooth chip morphology occurred as cutting speed increased. Abrasion in the flank face, the adhered chips on the wear surface, and even melt chips were the most typical wear forms. Complex and synergistic interactions among abrasive wear, coating delamination, adhesive wear, oxidation wear, and thermal mechanical–mechanical impacts were the main wear or failure mechanisms. As the cutting speed was very high (>2000 m/min), discontinuous or fragment chips and even melt chips were produced, but few chips can be collected because the chips easily burned under the extremely high cutting temperature. Large area flaking, extreme abrasion, and serious adhesion dominated the wear patterns, and the tool wear mechanisms were the interaction of thermal wear and mechanical wear or failure under the ultra-high frequency and strong impact thermo-mechanical loads.
Highlights
Due to the high strength-to-weight ratio maintained at elevated environment, combined with the high fracture resistance, and exceptional corrosion resistance, Ti6Al-4V as one of the most attractive titanium alloys is extensively used for aerospace and automotive applications
The workpiece material exhibited the brittle behavior with little effect of either strain rate or temperature
This should obviously be ascribed to the higher strain rates and temperature variation under very high cutting speeds, and the process was more complex during chip formation
Summary
Due to the high strength-to-weight ratio maintained at elevated environment, combined with the high fracture resistance, and exceptional corrosion resistance, Ti6Al-4V as one of the most attractive titanium alloys is extensively used for aerospace and automotive applications. The analysis of chip morphologies, chip formation mechanisms, tool wear morphologies, and tool wear mechanisms was conducted utilizing optical microscope and scanning electron microscopy (SEM) images of the chips and energy-dispersive spectroscopy (EDS) results of special location or area These produced new analysis results and data will be of significance to practicing master engineers and help enhance the scientific comprehension of the possibility of using coated carbide tool and its cutting performance and degradation at very high cutting speeds
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
