Abstract
The influence of chitosan impregnation on the tensile and flexural strength of the short coir fiber reinforced polyester composites were studied in this investigation. The chitosan fillers were dispersed in polyester matrix, and laminates were prepared by reinforcing coir fibers in chitosan –polyester matrix. The composites were fabricated by varying filler content, fiber content and fiber length in three levels and their influence on tensile and flexural strength of the composites were studied. The composites with fiber length 30 mm, filler content 4% and fiber content 25% showed better values tensile (23 MPa) and at the same time the flexural strength (28MPa) of the composite was observed to be better with fiber length 30 mm, filler content 4 % and fiber content 25%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
