Abstract
This study investigates the cellulose–lignin interactions during fast pyrolysis at 100–350 °C for better understanding fundamental pyrolysis mechanism of lignocellulosic biomass. The results show that co-pyrolysis of cellulose and lignin (with a mass ratio of 1:1) at temperatures < 300 °C leads to a char yield lower than the calculated char yield based on the addition of individual cellulose and lignin pyrolysis. The difference between the experimental and calculated char yields increases with temperature, from ∼2% 150 °C to ∼6% at 250 °C. Such differences in char yields provide direct evidences on the existence of cellulose–lignin interactions during co-pyrolysis of cellulose and lignin. At temperatures below 300 °C, the reductions in both lignin functional groups and sugar structures within the char indicate that co-pyrolysis of cellulose and lignin enhances the release of volatiles from both cellulose and lignin. Such an observation could be attributed to two possible reasons: (1) the stabilization of lignin-derived reactive species by cellulose-derived reaction intermediates as hydrogen donors, and (2) the thermal ejection of cellulose-derived species due to micro-explosion of liquid intermediates from lignin. In contrast, at temperatures ≥ 300 °C, co-pyrolysis of cellulose and lignin increases char yields, i.e., with the difference between the experimental and calculated char yields increasing from ∼1% at 300 °C to ∼8% at 350 °C. The results indicate that the cellulose-derived volatiles are difficult to diffuse through the lignin-derived liquid intermediates into the vapor phase, leading to increased char formation from co-pyrolysis of cellulose and lignin as temperature increases. Such an observation is further supported by the increased retention of cellulose functional groups in the char from co-pyrolysis of cellulose and lignin.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.