Abstract
To investigate the effect of the electrode materials on the electrochemical performance of Li-S cells, sulfur cathodes were constructed using four types of carbon blacks: Ketjenblack EC-600JD (KB-600), Printex XE-2, Cabot BP-2000, and Super-P. It was found that the electrochemical performance of sulfur cathode was strongly dependent on the type of carbon black used. In the first discharge, the sulfur cathodes containing carbon blacks with a high surface area, KB-600 (SBET = 1270 m2/g), Printex XE-2 (SBET = 950 m2/g), or Cabot BP-2000 (SBET = 1487 m2/g), showed much higher discharge capacities (>1200 mA h/g) than the sulfur cathode (710 mA h/g) with Super-P (SBET = 62 m2/g). It was observed that the sulfur cathodes with KB-600, Printex XE-2, or Cabot BP-2000, which showed very similar discharge capacities one another at a low rate of 0.2 C, exhibited significantly different electrochemical behavior (the discharge capacity and midvoltage) at a high rate of 1.0 C. In particular, the sulfur cathode with KB-600 showed an extremely high capacity (831 mA h/g) with a midvoltage of 2.07 V at a 1.0 C rate, and excellent capacity retention (79%) after 50 cycles.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
