Abstract
Electrochromism is the phenomena of reversible colour change in electrochromic (EC) materials due to a small applied voltage. Tungsten oxide (WO3) is one of the most studied cathodic electrochromic materials for its applications in smart windows, displays and rear-view ymirrors. In this work, WO3 films were fabricated on indium tin oxide (ITO) coated glass via the sol-gel spin-coating method. The influence of bias voltage on the EC properties of the fabricated WO3 films was studied. The optical properties were characterised by using ultraviolet-visible (UV-Vis) spectrophotometer and the EC properties were characterised by the chronoamperometry (CA) method. The fabricated WO3 films exhibited an optical transmittance of 80 % in the visible range. CA measurements revealed an increase in colouring and bleaching time and intercalated charge density as bias voltage was increased. Moreover, the colouring and bleaching transmittance of the WO3 films were found to decrease as bias voltage was increased. Within our measurement range, bias voltage of 1.0 V was found to be the optimum bias voltage where it corresponds to 34 % optical modulation and higher colouration efficiency of 22.6 cm2/C.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
