Abstract
This study provides shear test results of single-lap adhesive joints with aluminum 5754-H111. To investigate the effect of adhesive thickness on joint strength in single-lap adhesive joints, three different thicknesses (0.2, 1, and 2 mm) were applied. Increasing the adhesive thickness from 0.2 mm to 1 mm and from 0.2 mm to 2 mm resulted in a reduction in shear load of roughly 36% and 44%, respectively. It has been observed that the joint strength decreases with increasing adhesive thickness in single-lap adhesive joints with aluminum 5754-H111. In addition, single-lap adhesive joints were tested at various loading rates (1, 10, and 100 mm/min), and the influence of loading speed on adhesive strength was studied. The shear load increased with the loading speed in the test results of single-lap adhesive joints.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
