Abstract
Mechanical grinding is a common method used to enhance the pozzolanic activity of tailings, and these activated tailings can be used as supplementary cementitious materials in cement production. However, the addition of activated tailings usually reduces the workability of cement paste, and the mechanism of influence of different minerals in tailings on workability varies. In this study, three kinds of principal silicate minerals in tailings-quartz, feldspar, and mica-were mechanically activated. The influence of these activated minerals on the rheological properties of cement paste were studied in the absence or presence of PCE (polycarboxylate ether) superplasticizers, and the influence mechanism was investigated using rheology, TOC, contact angles, zeta potential, XPS, ICP-OES, and XRD. The results showed that quartz has the highest fluidity, and mica has the lowest. An increase in hydrophilicity decreased the flowability of the blended cement paste. The increase in the metal cation dissolution rate was the main reason for the decrease in the fluidity of PCE-blended cement pastes. The knowledge gained provides a valuable reference for the utilization of activated tailings in cement production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
