Abstract
A fully vectorial 3D beam propagation method (BPM) has been applied to obtain a required pattern of computer generated hologram (CGH) with a variable profile of four phase levels. The computer reconstruction of the CGH image having one and two focal spots was performed by application of the fully vectorial 3D BPM method. After transferring the CGH by EBL technique an adequate phase profile was obtained. Inter-level parameter method was developed to obtain the estimated an electron beam dose required for the even topographical patterning. Using this method, an EBL exposure dose determined to achieve the required relief amplitude of 1.29 μm was 43 μC/cm 2. The manufactured holograms showed that the overall proposed production process, from the 3D BPM computer simulation to e-beam lithography, can be used to obtain good quality product with reasonable time and computational resources.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
